Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present a 2-D Contact Dynamics discrete element model for simulating initiation and motion of rock avalanches, integrating hillslope geometry, Mohr-Coulomb rock behavior, pore pressure before avalanche triggering, and avalanche trigger. Avalanche motion is modeled as a dense granular flow of dry frictional and cohesive particles. On the basis of granular physics and shear experiments, we review some of the theories for the unexpectedly long runout of rock avalanches. Different causes are evoked, according to the strength (strong or weak) of the slip surface relative to the bulk. "Mechanical fluidization'' and "acoustic fluidization'' theories state that agitation of rock particles reduces frictional strength, increasing runout. Conversely, granular mechanics suggests that, as "shear-strain'' rate increases, granular material becomes more agitated, more dissipative, and more resistant. Another theory states that dynamic fragmentation of clasts creates an isotropic pressure that drives longer runout. In contrast, granular mechanics suggests that fragmentation may induce fluidization and strengthening of the granular material, while particle size reduction (among others) induces weakening of the granular flow and enhances long runout. Runout is also enhanced for column-like rock masses collapsing from steep hillslopes. Long runout may also be linked to thermal weakening mechanisms at the slip surface (e.g., thermal pressurization, and shear melting), which may lower drastically the shear strength. The model is illustrated with a hypothetical example of a rain-triggered avalanche, mobilizing shallowly dipping layers. Several phases are identified, including slope failure, avalanche triggering resulting from slip weakening, and avalanche motion in which rocks are folded and sheared.
ISSN: 0148-0227

hal-00420883
https://hal.archives-ouvertes.fr/hal-00420883
DOI : 10.1029/2008JF001072

Éditeur(s) : Gauthier-Villars
Résumé : Long tropical instability waves are described at around 3-4 degrees N based on results of a simulation performed with a general circulation model for the Atlantic Ocean. This description is in agreement with earlier observations of organized undulations of the summer thermal front associated with anti-cyclonic eddies propagating westward at 30-40 km/day along 3-4 degrees N from 10 to 40 degrees W through the Atlantic basin. However, the simulation indicated the presence of long waves in early boreal winter. In this respect, satellite observations during short cold events in winter show thermal front undulations similar to those associated with long wave propagations. The simulation clearly demonstrated large vertical movements between the surface and a depth of 70 m, associated with anti-cyclonic eddies at around 3 degrees N. These vertical movements could commonly reach the thermocline in the central part of the Atlantic basin (10-20 degrees W). In this region, long instability waves could subsequently affect biological production by ''eddy pumping''. During the PIRAL cruise at 4 degrees N-20 degrees W in June 1986, remarkably high chlorophyll concentrations (the highest values in our data bank for the equatorial Atlantic and typical of a very productive zone) were associated with currents similar to those of an anticyclonic eddy and characterized by a surface temperature distribution typical of the long instability wave pattern. These high chlorophyll concentrations may have resulted from ''eddy pumping'' and/or strong meridian advection since each of these mechanisms is associated with long instability waves.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1994 , Vol. 17 , N. 6 , P. 585-596

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00099/21034/18660.pdf
http://archimer.ifremer.fr/doc/00099/21034/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Numerical models show that small-scale convection (SSC) occurring atop a mantle plume is a plausible mechanism to rejuvenate the lithosphere. The triggering of SSC depends on the density contrast and on the rheology of the unstable layer underlying the stagnant upper part of the thermal boundary layer (TBL). Partial melting may change both properties. We analyze, using 2-D numerical simulations, how partial melting influences the dynamics of time-dependent SSC instabilities and the resulting thermo-mechanical rejuvenation of an oceanic plate moving atop of a plume. Our simulations show a complex behavior, with acceleration, no change, or delay of the SSC onset, due to competing effects of the latent heat of partial melting, which cools the plume material, and of the buoyancy increase associated with both melt retention and depletion of residue following melt extraction. The melt-induced viscosity reduction is too localized to affect significantly SSC dynamics. Faster SSC triggering is promoted for low melting degrees (low plume temperature anomalies, thick lithosphere, or fast moving plates), which limit both the temperature reduction due to latent heat of melting and the accumulation of depleted buoyant residue in the upper part of the unstable layer. In contrast, high partial melting degrees lead to a strong temperate decrease due to latent heat of melting and development of a thick depleted layer within the sublithospheric convecting layer, which delay the development of gravitational instabilities. Despite differences in SSC dynamics, the thinning of the lithosphere is not significantly enhanced relatively to simulations that neglect partial melting.
ISSN: 1525-2027

hal-01277175
https://hal.archives-ouvertes.fr/hal-01277175
DOI : 10.1002/2015GC005967

Éditeur(s) : HAL CCSD InTech
Résumé : Available from: http://www.intechopen.com/books/evaporation-condensation-and-heat-transfer/heat-transfer-in-buildings-application-to-solar-air-collector-and-trombe-wall-design
International audience
The aim of this paper is to briefly recall heat transfer modes and explain their integration within a software dedicated to building simulation (CODYRUN). Detailed elements of the validation of this software are presented and two applications are finally discussed. One concerns the modeling of a flat plate air collector and the second focuses on the modeling of Trombe solar walls. In each case, detailed modeling of heat transfer allows precise understanding of thermal and energetic behavior of the studied structures. Recent decades have seen a proliferation of tools for building thermal simulation. These applications cover a wide spectrum from very simplified steady state models to dynamic simulation ones, including computational fluid dynamics modules (Clarke, 2001). These tools are widely available in design offices and engineering firms. They are often used for the design of HVAC systems and still subject to detailed research, particularly with respect to the integration of new fields (specific insulation materials, lighting, pollutants transport, etc.). Available from: http://www.intechopen.com/books/evaporation-condensation-and-heat-transfer/heat-transfer-in-buildings-application-to-solar-air-collector-and-trombe-wall-design
Evaporation, condensation and heat transfer

Droits : info:eu-repo/semantics/OpenAccess
ISBN : 978-953-307-583-9
hal-00767482
https://hal.archives-ouvertes.fr/hal-00767482
https://hal.archives-ouvertes.fr/hal-00767482/document
https://hal.archives-ouvertes.fr/hal-00767482/file/InTecSubmitted.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Imaging deep active volcanic areas remains a challenge in our understanding of their activity and evolution, especially in subduction zones. Study of magnetic anomalies is appropriate to access such dynamics in depth. The magnetic anomaly pattern of the Lesser Antilles Arc (LAA) subduction is studied through Curie Point Depth (CPD), interpreted as the depth of the 580 °C isotherm, and developed to better assess the deep thermal structure of the arc. The depth of the estimated CPD exhibits a complex topography. Keeping in mind the overall uncertainty associated with this method, a main doming is evidenced below the Guadeloupe archipelago. Its apex is shifted towards the ancient arc, suggesting a very hot state of the fore-arc/arc domain. To better understand the LAA thermal state, we perform 2D thermo-mechanical simulations of the subduction zone. Recalling that magnetite is a serpentinization by-product, we simulate water transfer triggered by slab dehydration to test the assumption of fore-arc serpentinization suggested by the positive magnetic anomaly in the vicinity of the Guadeloupe archipelago. In this area, the subduction-induced arc lithosphere hydration and related weakening trigger a fast heating of the upper plate by basal convective removal. This process of fast arc lithosphere thinning may apply where simultaneously the volcanic arc is split in two and normal convergence is high enough. As serpentinization strongly decreases P-wave velocity, we propose a new interpretation of a published seismic profile below Guadeloupe. The seismic layer previously interpreted as the arc lower crust may rather be a layer of serpentinized mantle, as supported by spatial correlations between gravimetric and magnetic anomalies. Consequently, at the scale of Guadeloupe Island, the fore-arc Moho would be shallower than initially assumed, with a dome shape more consistent with both the extensive deformation active since the Oligocene in the inner fore-arc and the CPD doming.
ISSN: 0040-1951

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01505300
https://hal-insu.archives-ouvertes.fr/insu-01505300
https://hal-insu.archives-ouvertes.fr/insu-01505300/document
https://hal-insu.archives-ouvertes.fr/insu-01505300/file/Gailler-2017.pdf
DOI : 10.1016/j.tecto.2017.03.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : Validation of building energy simulation programs is of major interest to both users and modellers. To achieve such a task, it is essential to apply a methodology based on a priori test and empirical validation. A priori test consists in verifying that models embedded in a program and their implementation are correct. this should be achieved before carrying out experiments. The aim of this report is to present results from the application of the BESTEST procedure to our code. We will emphasise the way it allows to find bugs in our program and also how it permits to qualify models of heat transfer by conduction
World Renewable Energy Congress VI Renewables: The Energy for the 21st Century World Renewable Energy Congress VI 1-7 July 2000 Brighton, UK

ISBN : 978-0-08-043865-8
hal-00767562
https://hal.archives-ouvertes.fr/hal-00767562
https://hal.archives-ouvertes.fr/hal-00767562/document
https://hal.archives-ouvertes.fr/hal-00767562/file/TedWrec2000.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims at better deciphering the different mechanisms involved in the functioning of the subduction interplate. A 2D thermo-mechanical model is used to simulate a subduction channel, made of oceanic crust, free to evolve. Convergence at constant rate is imposed under a 100 km thick upper plate. Pseudo-brittle and non-Newtonian behaviours are modelled. The influence of the subduction channel strength, parameterized by the difference in activation energy between crust and mantle () is investigated to examine in detail the variations in depth of the subduction plane down-dip extent, . First, simulations show that numerical resolution may be responsible for an artificial and significant shallowing of if the weak crustal layer is not correctly resolved. Second, if the age of the subducting plate is 100 Myr, subduction occurs for any . The stiffer the crust is, that is, the lower is, the shallower is (60 km depth if kJ/mol) and the hotter the fore-arc base is. Conversely, imposing a very weak subduction channel ( J/mol) leads there to an extreme mantle wedge cooling and inhibits mantle melting in wet conditions. Partial kinematic coupling at the fore-arc base occurs if kJ/mol. If the incoming plate is 20 Myr old, subduction can occur under the conditions that the crust is either stiff and denser than the mantle, or weak and buoyant. In the latter condition, cold crust plumes rise from the subduction channel and ascend through the upper lithosphere, triggering (1) partial kinematic coupling under the fore-arc, (2) fore-arc lithosphere cooling, and (3) partial or complete hindrance of wet mantle melting. then ranges from 50 to more than 250 km depth and is time-dependent if crust plumes form. Finally, subduction plane dynamics is intimately linked to the regime of subduction-induced corner flow. Two different intervals of are underlined: 80–120 kJ/mol to reproduce the range of slab surface temperature inferred from geothermometry, and 10–40 kJ/mol to reproduce the shallow hot mantle wedge core inferred from conditions of last equilibration of near-primary arc magmas and seismic tomographies. Therefore, an extra process controlling mantle wedge dynamics is needed to satisfy simultaneously the aforementioned observations. A mantle viscosity reduction, by a factor 4–20, caused by metasomatism in the mantle wedge is proposed. From these results, I conclude that the subduction channel down-dip extent, , should depend on the subduction setting, to be consistent with the observed variability of sub-arc depths of the subducting plate surface.
ISSN: 0031-9201

hal-01623155
https://hal.archives-ouvertes.fr/hal-01623155
DOI : 10.1016/j.pepi.2017.05.008

Éditeur(s) : Fort-de-France : Imprimerie du Gouvernement
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Archives départementales de Guadeloupe
Permalien : http://www.manioc.org/patrimon/ADG17049
ADG17049

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deformation of the continental lithosphere is traditionally modeled assuming that heat production in the subcontinental lithospheric mantle is negligible. Although this may be appropriate for highly depleted Archean lithosphere, studies of mantle xenoliths and lithospheric-derived mafic rocks suggest that heat productions of up to 0.4 ;μW/m3 may be attained in the mantle of Phanerozoic and Neoproterozoic regions due to modal metasomatism. To investigate the effect of a local enrichment in heat-producing elements within the lithospheric mantle on the continental deformation, we performed a series of 2D thermo-mechanical models simulating the deformation of a lithospheric plate 1000 km long, which contains in its central part a 200 km wide and 20 km-thick mantle layer with a heat production of 0.05;–0.25 ;μW/m3 between 40 and 80 km depth, leading to a local enhancement of the surface heat flow by 1;–5 mW/m2. Compression models show that a 20 km-thick layer with a heat production as low as 0.05 ;μW/m3 within the shallow lithospheric mantle leads to strain localization in both the enriched mantle and the overlying crust. Strain localization depends exponentially on the temperature increase in the lithosphere section, which is controlled by the volume of metasomatized mantle and the intensity of the metasomatic enrichment in heat-producing elements. A heat production of 0.25 μW/m3 between 60 and 80 km depth results, for instance, in strains within and above the metasomatized mantle 5 times higher than in the surrounding lithosphere. Strain localization also depends on the location of the heat-producing domain and on the plate rheological structure; deeper heat-producing domains and weaker plates leading to stronger localization. These results provide an explanation for strain localization in intraplate environments, leading to the formation of orogenic belts situated hundreds to thousands of kilometers away from known plate boundaries, as observed in the Neoproterozoic belts of Gondwana and in the present-day deformation of the Asian plate.
ISSN: 0012-821X

hal-00411386
https://hal.archives-ouvertes.fr/hal-00411386
DOI : 10.1016/j.epsl.2008.07.040

Date de création : 1869-01-01

Éditeur(s) : London : Bell & Daldy
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Collectivité territoriale de Guyane. Bibliothèque Alexandre-Franconie
Permalien : http://www.manioc.org/patrimon/FRA11001
FRA11001

Éditeur(s) : Paris : Librairie Cocheris
Résumé : "Relié avec "Quelques souvenirs, ou notes fidèles sur mon service au temple : depuis le 8 décembre 1792 jusqu'au 26 mars 1793 et sur quelques faits relatifs au procès de la Reine et à celui des membres de la commune accusés de conspiration avec la famille royale" et "Journal de l'adjudant-général Ramel, commandant de la garde du corps législatif de la république Française, l'un des déportés a la Guiane après le 18 fructidor.""
Siècle(s) traité(s) : 18
Droits : Domaine public
Provenance : Evêché de Guyane
Permalien : http://www.manioc.org/patrimon/FRA11134a
FRA11134a

Éditeur(s) : Paris : H. Nicolle
Résumé : "Relié avec "Défense des émigrés français, adressée au peuple français" et "Journal de l'adjudant-général Ramel, commandant de la garde du corps législatif de la république Française, l'un des déportés a la Guiane après le 18 fructidor.""
Seconde édition
Siècle(s) traité(s) : 18
Droits : Domaine public
Provenance : Evêché de Guyane
Permalien : http://www.manioc.org/patrimon/FRA11134c
FRA11134c

Éditeur(s) : Londres : [s.n.]
Résumé : Relié avec "Quelques souvenirs, ou notes fidèles sur mon service au temple : depuis le 8 décembre 1792 jusqu'au 26 mars 1793 et sur quelques faits relatifs au procès de la Reine et à celui des membres de la commune accusés de conspiration avec la famille royale" et "Défense des émigrés français, adressée au peuple français"
Seconde édition
Siècle(s) traité(s) : 18
Droits : Domaine public
Provenance : Evêché de Guyane
Permalien : http://www.manioc.org/patrimon/FRA11134b
FRA11134b

Éditeur(s) : Basse-Terre : Imp. du Gouvernement
Siècle(s) traité(s) : 17
Provenance : Archives départementales de Guadeloupe
Permalien : http://www.manioc.org/patrimon/ADG18131
ADG18131

Éditeur(s) : Paris : chez l'auteur
Siècle(s) traité(s) : 18
Droits : Domaine public
Provenance : Ville de Pointe-à-Pitre. Réseau des bibliothèques
Permalien : http://www.manioc.org/patrimon/PAP11033
PAP11033

Éditeur(s) : Lyon : Reymann
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Collectivité territoriale de Martinique. Bibliothèque Schoelcher
Permalien : http://www.manioc.org/patrimon/SCH13273
SCH13273

Éditeur(s) : [S.l.] : Harper
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Université des Antilles. Service commun de la documentation
Permalien : http://www.manioc.org/patrimon/HASH40423832e7422746ff4d15
HASH40423832e7422746ff4d15